You are here

Entergy Texas - Residential and Small Commercial Standard Offer Program

Eligibility 
Commercial
Construction
Residential
Low Income Residential
Savings Category 
Water Heaters
Lighting
Air conditioners
Caulking/Weather-stripping
Duct/Air sealing
Building Insulation
Custom/Others pending approval
Maximum Rebate 

Contact Entergy

Program Info
Sector Name 
Utility
Administrator 
Entergy Texas, Inc.
State 
Texas
Program Type 
Rebate Program
Rebate Amount 

Residential:
Infiltration: $250/kW, $0.07/kWh
Duct Sealing: $250/kW, $0.07/kWh
Ceiling insulation: $300/kW, $0.10/kWh
Compact Florescent Light Bulbs: $160/kW, $0.06/kWh
Water Heater Measures: $150/kW, $0.08/kWh
Window A/C: $477/kW, $0.14/kWh

Hard To Reach:
Infiltration: $420/kW, $0.15/kWh
Duct Sealing: $420/kW, $0.15/kWh
Ceiling insulation: $450/kW, $0.15/kWh
Compact Florescent Light Bulbs: $160/kW, $0.06/kWh
Water Heater Measures: $180/kW, $0.10/kWh
Window A/C: $500/kW, $0.16/kWh

Summary 

The Hard to Reach and Residential Standard Offer Programs provides incentives for the retrofit or new construction installation of a wide range of energy efficiency measures. The program does not prescribe technologies or end uses, but provides a framework through which energy efficiency service providers can receive incentives to achieve cost-effective reduction in peak summer demand. If the customer uses the performance based calculations to determine an incentive, the implementation payment may be added to the kW saved payment. Entergy will not make a total incentive payment (i.e., the sum of the Implementation Payment and the Performance Payment) that is more than 100% of the total estimated incentive payment specified in the Standard Offer Program Agreement. If the measured savings are less than the estimated savings, the total incentive payment will be less than the payment estimated in the agreement.