These presentations were given at the International Hydrogen Fuel and Pressure Vessel Forum held September 27–29, 2010 in Beijing, China.
September 27, 2010
Keynote: Status and Progress in Research, Development and Demonstration of Hydrogen-Compressed Natural Gas Vehicles in China
Professor Z.Q. Mao
Tsinghua University and Chair of the China Association for Hydrogen Energy
Hydrogen and Fuel Cell Technologies in the U.S–DOE Overview
Dr. Sunita Satyapal
Program Manager for the DOE Fuel Cell Technologies Office
Topical Lecture: Research on Natural Gas-Hydrogen Engines
Professor Zuohua Huang
Xi'an Jiaotong University
Test Protocol for Hydrogen Storage Systems in SAE J2579 and GTR Requirements for Cycling Testing and Its Effects on Type 3 and 4 Containers
Dr. Chris Sloane
Consultant to DOE
Safety Analysis of Type 4 Tanks in CNG Vehicles
Ms. Min Lei
Beijing Special Equipment Inspection and Testing Center (BSEIC)
Type 4 Tank Testing, Certification and Field Performance Data
Mr. Joe Wong
Powertech
Pressure Vessels for Hydrogen Vehicles: An Original Equipment Manufacturer (OEM) Perspective
Mr. George Hansen
General Motors (GM)
Development of Larger Diameter High Pressure CNG Cylinder Manufactured by Piercing and Drawing for Natural Gas Vehicle
Mr. Xiakang Ma
Zhejiang Jindun Holding Group
HCNG Engine Testing and HCNG Vehicle Marketing in China
Professor Fanhua Ma
Tsinghua University
High-pressure Storage Vessels for Hydrogen, Natural Gas and Hydrogen-Natural Gas Blends
Mr. Frank Lynch
Hythane Company LLC
Bonfire Tests of High Pressure Hydrogen Storage Tanks
Professor J. Zheng
Zhejiang University
September 28, 2010
Keynote: R&D Needs for Global Technical Regulations for Hydrogen Vehicle Systems
Mr. Nha Nguyen
DOT
Topical Lecture: Properties, Behavior and Material Compatibility of Hydrogen, Natural Gas and Blends — Materials Testing and Design Requirements for Hydrogen Components and Tanks
Dr. Jay Keller
Sandia National Laboratories
Testing and Certification of Gaseous Storage Tanks for Vehicles: The European Commission (EC) Perspective
Mr. Pietro Moretto
Joint Research Centre for the European Commission
Tank Manufacturing, Testing, Deployment and Field Performance
Dr. Norm Newhouse
Lincoln Composites
R&D of Large Stationary Hydrogen/CNG/HCNG Storage Vessels
Professor J. Zheng
Zhejiang University
Tank Manufacturing, Testing, Deployment and Field Performance
Dr. Christian Rasche
Dynetek
Non Destructive Evaluation (NDE) Methods for Certification and Production/Performance Monitoring of Composite Tanks
Mr. J. David McCloseky
U.S. Department of Commerce National Institute of Standards and Technology (NIST)
Presentations that are not posted will be available soon.