DOE Announces Webinars on Energy Planning for Tribal Economic Development and Water Efficiency and Energy Savings

Webinars are free; however, advanced registration is typically required.

Upcoming Webinars

TODAY! January 27: Live Webinar on Energy Planning for Tribal Economic Development

Webinar Sponsors: DOE Office of Indian Energy, Western Area Power Administration

The Energy Department will present a live webinar titled "Energy Planning for Tribal Economic Development," on Wednesday, January 27, from 1-2 p.m. EST. This webinar is the first in the Tribal Energy and Economic Development Webinar Series. Learn about tools and resources available to establish a plan for clean, diverse, and affordable energy based on energy efficiency and wise use of renewable resources, with maximum local control and ownership.

Register for the webinar here.

February 2: Live Webinar on Downstream Savings: From Water Efficiency to Energy Savings

Webinar Sponsor: Better Buildings

The Energy Department will present a live webinar titled "Downstream Savings: From Water Efficiency to Energy Savings," on Tuesday, February 2, from 3-4 p.m. EST. Join this webinar to hear innovative measures Better Buildings Challenge partners are taking to improve water efficiency while reducing energy use. United Technologies Corporation will discuss its impressive water reduction goals and best practices in managing water, while also focusing on energy management strategies at diverse manufacturing sites.

Register for the webinar here.

FINAL NOTICE: Smart Manufacturing FOA Application Due – January 29

A full application for the Manufacturing Innovation Institute for Smart Manufacturing: Advanced Sensors, Controls, Platforms, and Modeling for Manufacturing funding opportunity is due on Friday, January 29, 2016 by 5 pm EST.

Please refer to the Funding Opportunity Announcement (FOA) for eligibility requirements and procedures for submitting an application.

AMO Partner IACMI Hosts Membership Meeting in Detroit

On January 13-14, the Institute for Advanced Composites Manufacturing Innovation (IACMI) held its second membership meeting near Detroit, Michigan. The day and a half-long meeting included presentations highlighting successful collaboration efforts between members, and also provided an opportunity to discuss goals and research opportunities going forward. IACMI is the fifth Institute in the National Network of Manufacturing Innovation (NNMI), and is supported by the DOE's Advanced Manufacturing Office.

Read our AMO blog to learn more.