According to DOE-STD-1146-2007, General Technical Base Qualification Standard, this module was to summarize the quality assurance information found in attachments 3, 4, and 5, of DOE O 414.1C, Quality Assurance, and its supporting guides, DOE G 414.1-3, Suspect/Counterfeit Items Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1B, Quality Assurance, DOE G 414.1-4, Safety Software Guide for Use with 10 CFR 830 Subpart A, Quality Assurance Requirements, and DOE O 414.1C, Quality Assurance, and DOE G 414.1-5, Corrective Action Program Guide. DOE O 414.1C has been replaced by DOE O 414.1D. DOE G 414.1-3 and DOE G 414.1-5 have been replaced by DOE G 414.1-2B, Quality Assurance Program Guide. DOE O 414.1D, DOE G 414.1-4, and DOE G 414.1-2B will be covered in this self-study module. This module is divided into three sections. Section one covers S/CI prevention, section two covers the corrective action management program, and section three covers the safety software quality requirements. The information provided will meet the relevant requirements in knowledge, skills, and abilities (KSA) number 19 of the DOE General Technical Base Functional Area Qualification Standard.